|
 |
A global leader in industrial laser
technology for applications in advanced manufacturing.
SIENNA - Laser Wire Stripping Products
and Extra Products and Services
SIENNA 200 series Laser Wire Strippers
SIENNA Laser Wire Strippers:
Unequalled Damage-Free, High-Quality Wire Stripping
No Blades – No Nicks – No
Conductor Damage
The SIENNA family of laser wire
stripping systems has been developed to meet the
requirements of a wide range of electrical manufacturing
applications for no nick damage free wire stripping:
The SIENNA series of laser wire
strippers offers fast, selective removal of wire
insulation without damage to metal conductors, providing
unrivalled levels of quality, consistency and
productivity. Spectrum Technologies laser wire strippers
are unmatched in their ability to strip very fine wires
used in high value electrical and electronic assemblies,
or large gauge wires used in power and RF (radio
frequency) applications commonly used in the aerospace
and telecommunications industries, as well as providing
advanced solutions for demanding applications in other
industry sectors such as medical, automotive.
For a more detailed discussion of laser wire stripping;
including its development and the wire types with which
it may be used, please see
laser wire stripping.
SIENNA systems are used extensively across the world by
a range of leading electronics’ manufacturers, providing
maximum strip quality and proving their value many times
over in terms of increased quality, productivity and
cost savings.
Whatever your application, we can provide a
SIENNA product to meet your needs!
We are very happy for you to send us your wire
samples to process. Please contact us at
sales@spectrumtech.com with your
enquiry.
SIENNA 210S
The SIENNA 210S is a single axis system with a scan area
(stripping area) of 100 mm (4 inches), suitable for end
stripping a wide variety of wire and cable types. Both
ribbon cables and single core wires can be stripped;
single core wires may be grouped and stripped
simultaneously in batches within the scan area to
maximise productivity.
SIENNA 210D
The SIENNA 210D is a dual axis CO2 laser system that
provides a higher level of functionality - moving the
laser beam in two directions, thus giving two axes of
movement. this additional capability allows the machine
to perform a cross-cut and slit operation to aid slug
removal and window strips to form terminations in the
centre of the wire or cable. The standard scan area is
100mm x 100mm (4 inch x 4 inch).
The SIENNA 210D also has the flexibility to adapt to a
variety of wire and cable sizes and shapes with the
added ability to strip both common and complex wire
insulators.
Both systems are easily programmed via the front panel
keypads; however a computer software interface is also
provided which allows for programming via a PC, thus
enabling a large number of wire file programs to be
created and stored.
We would be pleased to
discuss your particular requirements or process your
wire samples, and advise on the most appropriate model.
How does laser wire stripping work and how can SIENNA laser wire
strippers benefit your manufacturing operation? Click
technology/wire stripping to find out more.
CAPRIS
50-100 UV laser wire and cable marker:
the World’s first bench top UV laser wire
marker
|
The CAPRIS 50-100 is the latest development from Spectrum
Technologies, the world leader in the design and manufacture of
UV laser wire marking and processing systems. It has been
developed specifically to provide an affordable replacement to
hot stamp wire marking, which is considered an aggressive
marking process and unsuitable for current thin wall aerospace
wires in particular.
The CAPRIS 50-100 is a radical development in UV solid
state laser wire marking technology, featuring all the benefits
of Spectrum’s market leading CAPRIS wire marking systems
packaged into a bench top system. Designed for the processing of
single core wires and multicore cables employed in the aerospace
and other key industries, the CAPRIS 50-100 provides
mark, measure and cut capabilities for wires from 26 AWG up to 6
AWG. The system is designed for total simplicity: data is input
via the membrane key pad and wires are easily loaded for
processing; wire changes require no alteration to the wire
transport or marking system.
Marking a single character at a time, the CAPRIS 50-100
provides maximum print flexibility, allowing for up to 60
characters per identification code in both horizontal and
vertical print formats.
The system employs solid state laser technology and requires no
day to day consumables and only simple routine maintenance.
Significant cost benefits are achieved by comparison to the use
of direct ink marking methods and sleeve markers, through
increased system utilisation and productivity, reduced set up
and maintenance times, reduced consumable usage and the
availability of production aids, which further increase
productivity and reduce labour costs.
CAPRIS
50-100 brings UV laser wire marking equipment costs down to the
level of hot stamp wire markers for the first time. In addition
the direct wire and cable identification costs are about 1% of
those of heat shrink sleeve identification methods.
Typical applications include aircraft maintenance and
modification centres, low volume harness production, cellular
manufacturing and rework.
-
Non aggressive UV laser marking, no insulation damage
-
Complies with SAE AS50881, no need for insulation integrity
testing after marking
-
Ultimate mark performance resists hot hydraulic fluid, fuel,
abrasion
-
No pre or post treatment of wire, identification marks
remain clear and legible in service
-
Highly legible print - ergonomic font complies fully with
SAE ARP 5607 “Legibility of Print on Aerospace Wires and
Cables”
-
Fully integrated mark measure and cut system, simple system
set-up, optional connection to host database
-
Universal anvil accommodates full range of wire and cable
diameters - no set up
-
Rapid wire changeover in less than 30 seconds
-
No day to day consumables
-
Speeds downstream harness manufacture, reduces errors
-
Simplifies manufacturing, increasing productivity and
reduces costs
-
Low direct operating costs
For full details of our customers as well as a review of
aircraft programmes using CAPRIS UV laser wire marking
technology, please see
customers
Technical Specification
Brochure
Software addition brochure
|
Previously Owned Equipment
Previously owned and demonstration CAPRIS wire markers at
unbeatable prices. If you are in the market for a laser
wire marker but find that your budget won’t quite stretch, why not
consider a factory refurbished second hand unit? With over 300 units
supplied to the aerospace industry there is now a market in previously
owned units. Check out the
previously
owned equipment section to see what we currently have on offer.
Customer Support
All products come with:
- A standard 12 months warranty
- Full operator training is given at the time of
installation
- Customised maintenance training packages are
provided to meet customers’ specific needs.
- Telephone “hotline” technical support to
customers
- Maintenance and service contracts
- Break down call out service.
All provided by our dedicated customer support engineering team. For
further information see
product support.
CONTACT US ABOUT SPECTRUM TECHNOLOGIES
|
