|
330-724-3333
email us
 
| |
 
Terminating Presses
|
|
Technical Data
Air Supply: 80100 PSI (5.4 6.8 BAR)
Dimensions: 4 x 6.75 x 11.5 inch (102 x 172 x 293 mm)
Weight: 15 lbs. (6.8 Kg)
Crimping Force: Up to 1200 lbs (545 Kg) @ 100 PSI Supply
Terminal Uses: Insulated and un-insulated ring and forks,
F-crimp loose terminals, modular communication plugs,
Coaxial connectors, pin connectors, splice terminals, fiber
optic connectors
Wire Range: Up to 8 AWG (4 8 mm2). Wire range will
vary depending on terminal type and wire design
|
|
|
Technical Data
Pneumatic Feed: Improves crimp monitor systems by
eliminating force noise caused from the feeding cams
in the mechanical die unit
Tooling and Anvils: Are easily changed due to the
innovative design
Crimping Heights: Conductor and insulation crimps can
be independently adjusted in increments of 0.050 inch
(0.02 mm)
Global Star Family Dies: Can crimp wires from
28 10 AWG (.08 6.0 mm)
Available for side feed & end feed terminals
|
|
|
Technical Data
Press Stroke: Programmable 0 to 40 mm (0 - 1-5/8)
Crimp Height: Micro adjust (optional programmable)
+/-2.5 mm from nominal
Force Rating: 2500 lbs or 5000 lbs (1100 Kg or 2200 Kg)
Power Requirements: 110V or 220V, 1 Phase, 60/50 Hz.
Air Requirement: Required for Options Only |
|
|
Technical Data
Crimping Force: 20 kN (4500 lbs.)
Wire Range: Up to 8 AWG (8mm2) wire and terminal dependent
Stroke (Cycle Distance): 1.625 inch (42mm) Fixed
Shut Height (Lower Dead Center): 5.35 inch (135.78 mm) with Fine
Adjustment
Cycle Time: 0.30 Second
Voltage: Single Phase 110V, 60 Hz, or 220V, 50 Hz
Air Supply: 80 PSI (6-8 Bar)
Dimensions: 15.75 x 24.80 x 19.30 inch (400 x 630 x 490 mm)
Weight: 272 lbs. (124 Kg) |
|
|
STRIPPER CRIMPER
Technical Data
Crimping Force: 20 kN (4500 lbs.)
Wire Range: 26 - 14 AWG (0,14 2,5mm2)
Wire Stripping Length: .04 - .40 Inch (1 to 10 mm)
Stroke (Cycle Distance): 1.625 inch (42mm) Fixed
Shut Height (Lower Dead Center): 5.35 inch (135.78 mm)
Cycle Time: 1.0 Second
Voltage: Single Phase 110V, 60 Hz, or 220V, 50 Hz
Air Supply: 80 PSI (6-8 Bar)
Dimensions: 19.3 x 25 x 21 inch (490 x 630 x 530 mm)
Weight: 293 lbs. (133 Kg) |
|
|
SEAL STRIP & CRIMP
Technical Data
Crimping Force: 20 kN (4500 lbs.)
Wire Range: 26 - 14 AWG (0,14 2,5mm2)
Wire Stripping Length: 0.04 - .40 Inch (1 to 10 mm)
Seal Dimensions: Max. 0.4 inch (10 mm), max. length 0.4
inch (10mm)
Voltage: 230V, 50 Hz or 110V, 60 Hz (110V with
Transformer) Pneumatic supply: 6 - 8 bar (80 PSI)
Stroke: 41 mm fix (1.625 inch)
Shut Height (Lower Dead Center): 135.78 mm (5.35 inch)
Cycle time: 2.1 Sec
Weight: 420 lbs. (191 Kg)
Dimensions WxHxD: 19.3 x 28.3 x 30.7 inch (490 x 720 x
780 mm) Noise level: Approx. 70 dBA |
|
